lifestyledhome We spent many hours on research to finding original blade for nutri ninja, reading product features, product specifications for this guide. For those of you who wish to the best original blade for nutri ninja, you should not miss this article. original blade for nutri ninja coming in a variety of types but also different price range. The following is the top 10 original blade for nutri ninja by our suggestions
873 reviews analysed
Replacement Parts for Nutri Ninja, Blender Blade Assembly and 2 Pack Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender
- BEFORE PURCHASING – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS. 3) 3.35″ (8.5cm) Diameter. 6 fins blade only fits for Ninja BL770, BL771, BL773CO ,BL780, BL660, BL740
- EASY TO USE – Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, and ice.
- EASY TO CLEAN – The 16-Ounce Cup and Blender Blade are Made of Eco-friendly materials, dishwasher safe, easy to clean.
- PACKAGE INCLUDE – 1* Single Serve Blade, 2 * 16-Oz Single Serve Cups with Lid
- MONEY-BACK GUARANTEE – It’s non-original aftermarket part. for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 6 Fins Replacement Extractor Blade for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL450-70 BL451-70 BL482-70
- 【Apply To】The 6 Fins Blade is suitable for Nutri Ninja Auto iQ BL450-70,BL451-70,BL454-70,BL456-70,BL480-70,BL480D-70,BL481-70,BL482-70,BL490-70,BL487-70,BL488W-70,BL487A-70,BL486CO-70,BL491-70,BL492-70,BL492W-70 (Only fit for 12oz,16oz, 24oz, 32 oz cup).
- 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover
- The outer is made of durable PP material, Not easy to break and scrape.
- 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【Packing Include 】1 x 6 Fins Bottom Blade Replacements, 1 x Replacement Gasket Rubbers ( One Gasket Rubber already on the 6 Fins replacement blade). Please make sure your Ninjia blender base has 6 Fins before order !
- 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Compatible with Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
- Packing include: 1×7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Important Tips-Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Desiged for:Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 etc,
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)
This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender
Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013
- 【Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover
- The outer is made of durable PP material, Not easy to break and scrape.
- 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【Packing Includ 】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
- 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade （7 fins）
- 【Ninja Blade Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【Important Note】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【NOT COMPATIBLE】 IF ¡°DOB¡± is listed after the model number on the base of the blander food grade PP and stainless steel .
- 【Nutri Ninja Replacement Parts】 – Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel .
- 【Packing Include】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
BEFORE PURCHASING please check your existing blade for the following:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
Pay attention to before use:
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Blender Replacement Parts for Ninja, Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade （7 fins）
- 【Blade Apply toNinja 】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing)
- 【 Replacement Parts for Ninja parts 】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made ofmade of food grade stainless steel, high hardness, not easy to break, no gap.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 1 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【Desiged for】: NN101-30, BL486CO, BL482-30, BL482, BL685-30, BL682, BL455-30, CT680SS, CT680CO2SS, BL487A, BL680A, BL487, BL682-30, BL450-30, BL642, BL640, BL642-30, BL480, BL455, BL491, BL641, BL681A, BL680A-30, BL492, BL687CO, BL641-30, BL485, BL481,etc.
Sduck Replacement Parts for Nutri Ninja Blender, 16-Ounce (16 oz.) Single Serve Cup and Blade Fit for Nutri Ninja Series BL770 BL771 BL772 BL773 BL774 BL780 BL660 4 Tab Blenders
- Compatible models Ninja BL770-30 BL771-30 BL772-30 BL773co-30 BL774-30 BL780-30
- Four Tabs Single Serve To Go Cup with Blade
- PLEASE NOTE: These sets NOT FIT Auto-iQ Series blenders or some smaller Ninja blenders have 3 tabs, NOT FIT For Nutri Ninja 2-1 QB300 QB3000SSW QB3004 QB3005
- IF you are not sure, Please contact us before you order it. We make no claims that these are original Nutri Ninja products. 90-Days warranty, Quick Respond To All Messages, From”Sduck Seller”
This listing is only for 6-fin Ninja BL770 30 BL771 30 BL773 30 BL774 30 BL780 30
7 FIN Blade Assembly Replacement for BL480 Nutri Ninja Auto Blender BL2012 BL2013 BL450 BL456 BL480 BL481 BL482 BL486CO BL487 BL488W BL4890 BL491 BL492 BL493Z BL640 BL641 BL642 BL682
- Made of Food Grade BPA Free Plastic and Stainless Steel.
- Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- BEFORE PURCHASING PLEASE CHECK YOUR EXISTING BLADE BY COUNTING THE FINS
- It can be well loaded and easily removed. Just replace your bad blade and juicer can be reused, take off the pre-installed gasket in the bottom blade before using the replacement gasket.
- Please check the rubber gasket and be sure it is put snugly into the bottom blade.
Generic Nutri Ninja Blender Replacement Parts. The Blade Assembly is compatible with Tritan Nutri Ninja cups, Stainless Steel Nutri Ninja Cups. Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Compatible with the following models: BL2012, BL2013, BL456, BL480, BL480D, BL481, BL482, BL486CO BL487, BL487A, BL487Q, BL488W BL4890, BL491, BL492, BL492W BL493Z, BL640, BL641, BL642, BL642W, BL682 NN100, NN100A, NN101, NN102
Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641
- ✅[Ideal Replacement]: Want Blender 7 Fins Blade Assembly Replacement that matches the original, for far less than going back to the dealership? This Blender Blade was specifically designed to look and function the same as the original. While this is NOT a original part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅[Package included]: 1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.
- ✅[Direct Fit]: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping.
- ✅[Appliance Model]: Fit for Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680, BL680A, BL682, CT640C, CT641, CT680, CT680A, CT680SS, CT680W, CT682SP, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cups, NOT FIT FOR 16oz). Please verify your blender models and your original motor base is 7-fins before purchasing!
- ✅[Buy with Confidence]: We offer 3 MONTHS WARRANTY, true worry-free shopping experience. If the Blade ever fails on your Blender simply contact us.
Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.
Fits The Following Nutri Ninja Blender Models :
For Nutri Ninja BlendMax DUO with Auto-iQ Boost (BL2012, BL2013)
For Nutri Ninja Auto-iQ (BL480, BL480D, BL481, BL482)
For Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
For Nutri Ninja Auto-iQ Pro Complete (BL487, BL487A, BL488W)
For Nutri Ninja Auto-iQ Blender (BL490)
For Nutri Ninja Auto-iQ System (BL491, BL492)
For Nutri Ninja Auto-iQ Compact System (BL492W)
For Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640, BL641, BL642, BL642W, BL642Z)
For Nutri Ninja Blender System with Auto-iQ (BL680, BL680A, BL682)
For Ninja Intelli-Sense Blender Duo (CT640C, CT641)
For Ninja Intelli-Sense Kitchen System (CT680, CT680A, CT680SS, CT680W)
For Ninja Intelli-Sense Kitchen System with Auto-Spiralizer (CT682SP)
For Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost (NN100, NN100A, NN101, NN102)
If you have any problem about your order, please feel free to contact us.
Conclusion
By our suggestions above, we hope that you can found Original Blade For Nutri Ninja for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Original Blade For Nutri Ninja, eg:
- What are Top 10 Original Blade For Nutri Ninja for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Original Blade For Nutri Ninja to buy?
- What are Top Rated Original Blade For Nutri Ninja to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Original Blade For Nutri Ninja?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Original Blade For Nutri Ninja.
- Before deciding to buy any Original Blade For Nutri Ninja, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Original Blade For Nutri Ninja and What you should consider when buying the Original Blade For Nutri Ninja and Where to Buy or Purchase the Original Blade For Nutri Ninja. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Original Blade For Nutri Ninja of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Original Blade For Nutri Ninja.
