lifestyledhome Nowadays, there are so many products of ninja 4 fin blade replacement food processor in the market and you are wondering to choose a best one.You have searched for ninja 4 fin blade replacement food processor in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja 4 fin blade replacement food processor which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
978 reviews analysed
Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
NLSD Ninja Blender Replacement Parts Ninja Bottom Blade 6 Fins for Nutri Ninja Auto iQ BL482 BL456 Blenders (FEMALE FINS ONLY)
- BEFORE PURCHASING PLEASE CHECK YOUR EXISTING BLADE BY COUNTING THE FINS IT SHOULD BE “FEMALE” Fin’s on the Blade and 4″ (10cm) Diameter
- BEFORE PURCHASING: Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.
- FIT for Nutri Ninja Auto iQ BL480 BL480D BL482 Ninja Professional BL456 Blenders
- Made of food grade BPA Free plastic and stainless steel, effortlessly pulverizes fruits, vegetables, super foods and protein shakes into a delicious, smooth texture. Dishwasher safe.
BEFORE PURCHASING you need to check your Old Blade to make sure the following,.
1) Count the FINS IT SHOULD BE 6-FINS.
2) The blade has FEMALE FINS
3) 4″ (10cm) Diameter.
BEFORE PURCHASING Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.
Warranty Policy
●All products sold by NLSD are covered by 3 months warranty.
●NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
●If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
●Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.
Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Compatible with Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
- Packing include: 1×7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Important Tips-Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Desiged for:Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 etc,
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
NutriBullet Replacement Extractor Blade – Premium NutriBullet Replacement Parts & Accessories (Pack of 2)
- Replacement for NutriBullet Extractor Blade with Gasket. Fits Nutribullet Pro 900 and 600W Only. Does NOT fit Nutribullet Lean, RX, Magic Bullet or Ninja blenders.
- STAINLESS STEEL: This blade is made of stainless steel and will NOT need sharpening!
- DISHWASHER SAFE: High quality plastic and stainless steel that is 100% safe for dishwasher.
- PERFECT SEAL: Includes rubber gasket pre-installed in base for complete seal with cup
- We make no claims that these are original NutriBullet products but they work just like the original.
High-Quality: Made from high quality molded plastic Nutribullet blade blender base with stainless steel blades.
Compatibilety: Compatible with all NutriBullet Original (600 watts) & NutriBullet Pro (900 watts) blender accessories.
NOT Compatible: This blender cup WILL NOT WORK with NutriBullet Lean (1200 watts), NutriBullet RX (1700 watts) blenders, Magic Bullet or Ninja blenders.
Dishwasher Safe: It is made from high-quality plastic that is 100 safe for the dishwasher.
Percect Seal: It has a rubber gasket built in for a perfect seal with NutriBullet cups every time with no leaking.
Easy Handling:The threads are smoothed to make for easy on and easy off attachment of accessories.
We make no claims that these are original NutriBullet products but they work just like the original. We are not associated with Homeland Housewares LLC.
Replacement Nutri Ninja 32 Oz. Large Cup & Sip Seal Lid Model 407KKU641 408KKU641 (2 pack)
- Large 32 ounce Size Replacement Cup Dishwasher Safe
- High Quality BPA Free Plastic
- Models it fits are BL480 BL481 BL482 BL490 BL640 BL680 BL450 BL482 BL682 BL642 BL640 Includes Two 32 oz. Cups and Two Sip N Seal Lids Compatible with the BL450 Series, BL480 Series, BL640 Series, CT640 Series, and CT680 Series.
- 1 Year Warranty
The Nutri Ninja Jumbo Multi-Serve 32 oz Cup with Sip & Seal Lid Replacement Model 407KKU641 408KKU641 is compatible with the following Nutri Ninja models:
- Nutri Ninja Ninja BlendMax DUO with Auto-iQ Boost (BL2012)
- Nutri Ninja Ninja BlendMax DUO with Auto-iQ Boost (BL2013)
- Nutri Ninja Auto-iQ (BL480)
- Nutri Ninja Auto-iQ (BL480D)
- Nutri Ninja Auto-iQ (BL481)
- Nutri Ninja Auto-iQ (BL482)
- Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
- Nutri Ninja Auto-iQ Pro Complete (BL487)
- Nutri Ninja Auto-iQ Pro Complete (BL487A)
- Nutri Ninja Auto-iQ Pro Complete (BL488W)
- Nutri Ninja Auto-iQ Blender (BL490)
- Nutri Ninja Auto-iQ System (BL491)
- Nutri Ninja Auto-iQ System (BL492)
- Nutri Ninja Auto-iQ Compact System (BL492W)
- Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640)
- Nutri Ninja Ninja Blender DUO with Auto-iQ (BL641)
- Nutri Ninja Ninja Blender DUO with Auto-iQ (BL642)
- Nutri Ninja Ninja Blender DUO with Auto-iQ (BL642W)
- Nutri Ninja Ninja Blender DUO with Auto-iQ (BL642Z)
- Nutri Ninja – Ninja Blender System with Auto-iQ (BL680)
- Nutri Ninja – Ninja Blender System with Auto-iQ (BL680A)
3x Rubber Gasket Replacement Parts for 2.5" 6 pin Rubber Blade Nutri Ninja BL770 30 BL771 30 BL773 30 BL780 30 Blender (NOT For any other Ninja series)
This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender
BLEND PRO Replacement Nutri Ninja 24 oz Cup with Sip & Seal Lid – For Blender BL450 BL454 Auto-iQ BL480 BL481 BL482 BL687 (2-Pack)
- Premier Cups for Nutri Ninja 24 oz Cup with Sip & Seal Lid
- compatible with Nutri Ninja BL480 BL490 BL640 BL680 Auto IQ Series blenders
- All components are BPA free and dishwasher safe
- 100 satisfaction guaranteed or your money back
- ! ! be aware ! ! only seller BLEND PRO sells genuine BLEND PRO parts covered by
Blend Pro 24 oz Cups For Nutri Ninja Blender With Sip & Seal Lid 2-PACK
SunnyMemory Blender Replacement Parts for Ninja 7 Fins Bottom Blade, 1 replacement blade, 2 Gaskets, 1 Gasket Pick for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Blade
- 1.Compatible Blender Model: Nutri Ninja Auto iQ BL2012, BL2013, BL455, BL455-30, BL480, BL480D, BL481, BL482, BL482-30, BL685-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492, BL492W, BL640, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL450-30, BL680A, BL485, BL680A-30, BL681A, BL682, BL682-30, BL687CO, NN100, NN100A, NN101, NN102, NN101-30, BL2012, CT680SS, CT680CO2SS.
- 2.Please don’t buy this bottom blade for the blender model: BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
- 3.Premium Material Only: Anti-corrosive food-grade stainless steel bottom blade, sharper and durable, easy to handle frozen food and nuts. Please wipe it dry when you rinse it after use. It will extend the service life of the replacement part.
- 4.Warm Note: The rubber gasket in bottom blade might be loosened during transportation. Before using the bottom blade, please kindly check the rubber gasket and make sure that it is put snugly into the replacement bottom blade.
- 5.Package includes: 1 X Bottom Blade for Ninja(7 Fin), 2 X Extra Gaskets, 1 X Gasket remover tool. We will respond to you within 24 hours. Please feel free to contact us at any time if you have questions.
Compatible Blender Model: Nutri Ninja Auto iQ BL2012, BL2013, BL455, BL455-30, BL480, BL480D, BL481, BL482, BL482-30, BL685-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492, BL492W, BL640, BL641, BL641-30, BL642, BL642-30, BL642W, BL642Z, BL450-30, BL680A, BL485, BL680A-30, BL681A, BL682, BL682-30, BL687CO, NN100, NN100A, NN101, NN102, NN101-30, BL2012, CT680SS, CT680CO2SS.
Not Compatible with the Blender Model:BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70.
Product Package
1 X Replacement Bottom Blade
3 X Replacement Rubber Gasket(One is already on the bottom blade)
1 X Gasket Pick
24-hour after-sales service We will respond to you and solve your problems within 24 hours. Thank you for your support.
Conclusion
By our suggestions above, we hope that you can found Ninja 4 Fin Blade Replacement Food Processor for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Ninja 4 Fin Blade Replacement Food Processor, eg:
- What are Top 10 Ninja 4 Fin Blade Replacement Food Processor for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Ninja 4 Fin Blade Replacement Food Processor to buy?
- What are Top Rated Ninja 4 Fin Blade Replacement Food Processor to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ninja 4 Fin Blade Replacement Food Processor?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ninja 4 Fin Blade Replacement Food Processor.
- Before deciding to buy any Ninja 4 Fin Blade Replacement Food Processor, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Ninja 4 Fin Blade Replacement Food Processor and What you should consider when buying the Ninja 4 Fin Blade Replacement Food Processor and Where to Buy or Purchase the Ninja 4 Fin Blade Replacement Food Processor. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Ninja 4 Fin Blade Replacement Food Processor of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ninja 4 Fin Blade Replacement Food Processor.
